
SH-112 Shrimp Bolt-On with Camera Top
- UPC - 181741000112
- Packaging - HangTag H6" x W2-1/2" x D2-1/2" (peg only) or Box
- Weight - Unit 0.5 lbs. / Case 16 lbs. (24 per Case, L21" x W14" x H12")
Features: A removable 1/4-20 camera stud, universal mounting ball-base and mounting flange, lanyard loop; accommodates the AMPS bolt-up pattern (AMPS is a 1-1/2" by 1-3/16" screw hole pattern used in many portable electronic products). Aluminum alloy and reinforced composite parts with stainless steel hardware.
UN-310 Camera Top Instructions
Features: This is our standard ball base which has been enhanced with the addition of a removable camera stud and foam rubber pad. The hole and slot pattern around the perimeter of the flange are sized and arranged to accommodate several roles. The AMPS Standard (1-3/16 x 1-1/2) mounting pattern for small electronic devices is compatible. U-bolts for 1” to 1-1/2” tubing can be used. Close inspection will reveal a slight ridge around the perimeter of the bottom of the flange, which is a locator for certain Garmin* devices. Just using the holes and slots allows a solid connection to whatever needs a mount. At the base of the ball stem is a lanyard loop for extra security.
Application: In using the camera stud, check that it is not so long as to bottom out in your camera. It shouldn’t, but it is always better to be safe than sorry. Also, do not OVERTIGHTEN if you are using the threaded hole for some other application. That could loosen the nut insert and may void your guarantee.
*Garmin is a registered trademark of the Garmin Corporation.
LIMITED LIFETIME GUARANTEE
For as long as you own this Lobstermount, if it ever fails to give you complete satisfaction, return the product along with your original sales receipt for free repair or replacement, postage paid to our service address provided on our website: www.lobstermount.com. This warranty gives you specific rights and you may have other rights, which vary from state to state. This warranty does not cover damage or general deterioration due to misuse, abuse, neglect or modification.
WARNING!
NEVER OBSTRUCT A VIEW NECESSARY FOR SAFE VEHICLE OPERATIONS. NEVER MOUNT A DEVICE WHERE IT MIGHT CONFLICT WITH AIRBAG DEPLOYMENT.
Made in the U.S.A
